FS: Modular Iron Block + Forged Internals - short block - KCSR

Buford · 2012-04-18, 05:11 PM

Asking/Offering Price: $2000/$2150
Email Address/Phone Number (optional): 702-fivefivesix-02oneone (text first)
Zip Code: Overland Park
Pics: upon request
Name: justin young
Item Description: engine

Decided to sell this engine because it won't be able to handle the power I want to put through it. Should be good for ~700hp on the safe end.

Engine Block - Iron Romeo Block .020 overbore
Pistons - Diamond 19cc piston with valve reliefs
Rods - Eagle H-beam
Crank - 1998 Forged Cobra Crank
Extra - ARP2000 head studs, ARP Rod studs, new clevite bearings, total seal moly rings, balanced

Everything is located at MC Racing

Engine: $2000 without headstuds.... $2150 with.

Heads:
VT Stage II Ported PI Heads (220/195) Ferrara Valves, 10,000 miles $1100

Intake:
Stage II Ported Bullitt Intake, comes completed with everything to make the swap (aeromotive rails, throttle body, throttle cable, 100 misc parts) . $1100

Cams:
MMR Turbo Stage II Cams, brand new, never ran,
$450

These are priced to sell and move fast.

Call 702-556-0211 or email justin.r.young1@gmail.com if you are interested.

Thanks

tsiwithpsiftw · 2012-04-18, 06:58 PM

Quote:

Originally Posted by Buford

Decided to sell this engine because it won't be able to handle the power I want to put through it. Should be good for ~700hp on the safe end.

Engine Block - Iron Romeo Block .020 overbore
Pistons - Diamond Flat Tops(9.3 compression) with 2v heads
Rods - Manley H-beam
Crank - 1998 Forged Cobra Crank
Extra - ARP2000 head studs, new clevite bearings, total seal moly rings, balanced

The engine is located at MC Racing and is in the tear down process as we speak. Engine block has 1000 miles on it from previous build. The only new part is Pistons and they are brand new. This engine is ready to rock and roll.

Will consider parting out.

Price: $2000 pick up only

I'm just curious because i'll be looking for one soon, but how many miles average do these built forged motors with boost normally last for?

Buford · 2012-04-18, 07:10 PM

Depends on a lot of factors (tuning, boost, fuel, detonation, etc)

This one could easy see 100k+ miles.

tsiwithpsiftw · 2012-04-18, 07:13 PM

Quote:

Originally Posted by Buford

Depends on a lot of factors (tuning, boost, fuel, detonation, etc)

This one could easy see 100k+ miles.

Dang...This is what i'm looking for for my 99. If it doesn't go soon, which i'm sure it will, i'll be getting ahold of you.

Buford · 2012-04-18, 07:17 PM

There is nothing rowdy in the short block. It's a mild forged application that'll be more than enough for most people. The Manley Rods are the same design as what the 2003/4 Cobra uses and the crank is straight from a 1998 Cobra. The piston is Diamond and is of very high quality.

The engine is being torn down right now so you can head over to MC Racing new location in a few weeks to take a gander at it. To recreate this motor, you are looking at $3000-3500 due to labor and machining. Jerry Simpson at MC Racing is an expert engine builder and will take you step for step through the engine.

2TonCat · 2012-04-20, 08:31 AM

Quote:

Originally Posted by tsiwithpsiftw

I'm just curious because i'll be looking for one soon, but how many miles average do these built forged motors with boost normally last for?

FWIW, I'm running the same setup in mine except no cobra crank-- Has been a tank for the last 4 years. It has survived several tuning mishaps, and even one 20psi 7000rpm trip.

soonerstang07 · 2012-04-20, 08:40 PM

Is it a direct replacement for a 2004 mustang gt? Lookin for a new motor and am very interested

Buford · 2012-04-20, 09:10 PM

Quote:

Originally Posted by soonerstang07

Is it a direct replacement for a 2004 mustang gt? Lookin for a new motor and am very interested

Yes, you can bolt up your existing timing cover, heads, intake, headers etc. Still waiting on the CC of the piston.

HondaLuke · 2012-04-21, 07:58 PM

What about an 05 gt?

Buford · 2012-05-18, 05:10 PM

Yes, it would work for an 05 GT

Still for sale

godchsr · 2012-05-18, 06:07 PM

Are the pistons notched?

Buford · 2012-05-18, 07:41 PM

They are 19cc dish pistons with valve reliefs

Buford · 2012-05-18, 07:42 PM

Updated info at the top

Oldbones · 2012-05-19, 10:30 AM

Quote:

Originally Posted by Buford

There is nothing rowdy in the short block. It's a mild forged application that'll be more than enough for most people. The Manley Rods are the same design as what the 2003/4 Cobra uses and the crank is straight from a 1998 Cobra. The piston is Diamond and is of very high quality.

The engine is being torn down right now so you can head over to MC Racing new location in a few weeks to take a gander at it. To recreate this motor, you are looking at $3000-3500 due to labor and machining. Jerry Simpson at MC Racing is an expert engine builder and will take you step for step through the engine.

I thought Jerry was in Florida?

Buford · 2012-05-19, 12:47 PM

He was.

Buford · 2012-05-19, 03:16 PM

Most updated info here

Asking/Offering Price: $2000
Email Address/Phone Number (optional): (text first)
Zip Code: Lawrence
Pics: upon request
Name: justin young I
Item Description: engine

Decided to sell this engine because it won't be able to handle the power I want to put through it. Should be good for ~700hp on the safe end.

Engine Block - Iron Romeo Block .020 overbore
Pistons - Diamond 19cc piston with valve reliefs
Rods - Eagle H-beam
Crank - 1998 Forged Cobra Crank
Extra - ARP2000 head studs, ARP Rod studs, new clevite bearings, total seal moly rings, balanced

The engine is located at Mercer Machine & Performance

2406 Ponderosa Drive, Lawrence, KS

Price: $2000 pick up only

MyLittlePwny · 2012-05-19, 03:25 PM

FWIW this thing will last at well over 700hp. Good deal

godchsr · 2012-05-19, 05:33 PM

I am tempted since I just pulled my heads off and was planning on building my block for 500rwhp daily driven... plus I needed valve reliefs. hmmm

Buford · 2012-05-19, 05:59 PM

You won't find a better deal than this and you can head over to Mercer to look at it while its torn apart.

godchsr · 2012-05-19, 06:02 PM

Will this be reassembled or is that at the cost of the shop?

Buford · 2012-05-20, 09:24 PM

It should be ready to rock and roll. Ill call tomorrow to confirm

Buford · 2012-05-23, 07:09 PM

Selling VT stage II heads ($1100) and ported bullitt intake with Aeromotive rails and ported twin tb ($1000)

godchsr · 2012-05-23, 10:09 PM

You're killing me dude... hahaha. Ok I did some searching on google and couldn't find any info about VT. Can you direct me somewhere or give me some info on the vt stage 2 heads? Thanks!

Buford · 2012-05-24, 01:29 PM

Engine heads intake and cams are now at MC Racing new location. 2420 merriam lane kansas city kansas 66106
Call 913-789-9888 to schedule a time to look at everything.

Dr.Dilsnick · 2012-05-24, 02:40 PM

niggas puttin him an lsx in that bitch so he can go fast

2012-04-18, 05:11 PM	#1
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	FS: Modular Iron Block + Forged Internals - short block Asking/Offering Price: $2000/$2150 Email Address/Phone Number (optional): 702-fivefivesix-02oneone (text first) Zip Code: Overland Park Pics: upon request Name: justin young Item Description: engine Decided to sell this engine because it won't be able to handle the power I want to put through it. Should be good for ~700hp on the safe end. Engine Block - Iron Romeo Block .020 overbore Pistons - Diamond 19cc piston with valve reliefs Rods - Eagle H-beam Crank - 1998 Forged Cobra Crank Extra - ARP2000 head studs, ARP Rod studs, new clevite bearings, total seal moly rings, balanced Everything is located at MC Racing Engine: $2000 without headstuds.... $2150 with. Heads: VT Stage II Ported PI Heads (220/195) Ferrara Valves, 10,000 miles $1100 Intake: Stage II Ported Bullitt Intake, comes completed with everything to make the swap (aeromotive rails, throttle body, throttle cable, 100 misc parts) . $1100 Cams: MMR Turbo Stage II Cams, brand new, never ran, $450 These are priced to sell and move fast. Call 702-556-0211 or email justin.r.young1@gmail.com if you are interested. Thanks __________________ 1998 Mustang GT - built/tuned by MC Racing Last edited by Buford; 2012-06-18 at 01:12 AM..

2012-04-18, 07:10 PM	#3
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	Depends on a lot of factors (tuning, boost, fuel, detonation, etc) This one could easy see 100k+ miles. __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-04-20, 08:40 PM	#7
soonerstang07 Join Date: Aug 2006 Location: Lenexa, KS Posts: 103 Post Thanks / Like Thanks (Given): 0 Thanks (Received): 0 Likes (Given): 0 Likes (Received): 0 Dislikes (Given): 0 Dislikes (Received): 0	Is it a direct replacement for a 2004 mustang gt? Lookin for a new motor and am very interested __________________ 2004 Mustang GT Straight pipe, superchips, wingless, chin spoler, and window tint. THE BASICS!

2012-04-21, 07:58 PM	#9
HondaLuke Join Date: Apr 2009 Posts: 1,017 Post Thanks / Like Thanks (Given): 5 Thanks (Received): 1 Likes (Given): 7 Likes (Received): 0 Dislikes (Given): 4 Dislikes (Received): 0	What about an 05 gt? __________________ I live my life a quarter mile at a time, nothing else matters. For those ten seconds or less im free." "Live for nothing or die for something"

2012-05-18, 05:10 PM	#10
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	Yes, it would work for an 05 GT Still for sale __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-18, 06:07 PM	#11
godchsr Join Date: Aug 2006 Location: Raymore Posts: 1,575 Post Thanks / Like Thanks (Given): 12 Thanks (Received): 5 Likes (Given): 53 Likes (Received): 15 Dislikes (Given): 8 Dislikes (Received): 2	Are the pistons notched? __________________

2012-05-18, 07:41 PM	#12
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	They are 19cc dish pistons with valve reliefs __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-18, 07:42 PM	#13
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	Updated info at the top __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-19, 12:47 PM	#15
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	He was. __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-19, 03:16 PM	#16
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	Most updated info here Asking/Offering Price: $2000 Email Address/Phone Number (optional): (text first) Zip Code: Lawrence Pics: upon request Name: justin young I Item Description: engine Decided to sell this engine because it won't be able to handle the power I want to put through it. Should be good for ~700hp on the safe end. Engine Block - Iron Romeo Block .020 overbore Pistons - Diamond 19cc piston with valve reliefs Rods - Eagle H-beam Crank - 1998 Forged Cobra Crank Extra - ARP2000 head studs, ARP Rod studs, new clevite bearings, total seal moly rings, balanced The engine is located at Mercer Machine & Performance 2406 Ponderosa Drive, Lawrence, KS Price: $2000 pick up only __________________ 1998 Mustang GT - built/tuned by MC Racing Last edited by Buford; Yesterday at 12:13 AM..

2012-05-19, 03:25 PM	#17
MyLittlePwny DHG5295 Join Date: Feb 2007 Location: Wichita Posts: 14,286 Post Thanks / Like Thanks (Given): 88 Thanks (Received): 114 Likes (Given): 372 Likes (Received): 730 Dislikes (Given): 22 Dislikes (Received): 52	FWIW this thing will last at well over 700hp. Good deal __________________

2012-05-19, 05:33 PM	#18
godchsr Join Date: Aug 2006 Location: Raymore Posts: 1,575 Post Thanks / Like Thanks (Given): 12 Thanks (Received): 5 Likes (Given): 53 Likes (Received): 15 Dislikes (Given): 8 Dislikes (Received): 2	I am tempted since I just pulled my heads off and was planning on building my block for 500rwhp daily driven... plus I needed valve reliefs. hmmm __________________

2012-05-19, 05:59 PM	#19
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	You won't find a better deal than this and you can head over to Mercer to look at it while its torn apart. __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-19, 06:02 PM	#20
godchsr Join Date: Aug 2006 Location: Raymore Posts: 1,575 Post Thanks / Like Thanks (Given): 12 Thanks (Received): 5 Likes (Given): 53 Likes (Received): 15 Dislikes (Given): 8 Dislikes (Received): 2	Will this be reassembled or is that at the cost of the shop? __________________

2012-05-20, 09:24 PM	#21
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	It should be ready to rock and roll. Ill call tomorrow to confirm __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-23, 07:09 PM	#22
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	Selling VT stage II heads ($1100) and ported bullitt intake with Aeromotive rails and ported twin tb ($1000) __________________ 1998 Mustang GT - built/tuned by MC Racing

2012-05-23, 10:09 PM	#23
godchsr Join Date: Aug 2006 Location: Raymore Posts: 1,575 Post Thanks / Like Thanks (Given): 12 Thanks (Received): 5 Likes (Given): 53 Likes (Received): 15 Dislikes (Given): 8 Dislikes (Received): 2	You're killing me dude... hahaha. Ok I did some searching on google and couldn't find any info about VT. Can you direct me somewhere or give me some info on the vt stage 2 heads? Thanks! __________________

2012-05-24, 01:29 PM	#24
Buford Join Date: Dec 2004 Location: North Las Vegas Posts: 19,709 Post Thanks / Like	Engine heads intake and cams are now at MC Racing new location. 2420 merriam lane kansas city kansas 66106 Call 913-789-9888 to schedule a time to look at everything. __________________ 1998 Mustang GT - built/tuned by MC Racing